0
Total
0,00 lei
Nu există produse în coș.
Best Discounts
The best discounts this week
Every week you can find the best discounts here.
Amortizor spate
Date tehnice:
Diametru interior: 58-60 mm
Lungime: 210 mm
Rata arcului: 90 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 175 mm
Rata arcului: 115 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 175 mm
Rata arcului: 120 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 245 mm
Rata arcului: 80 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 245 mm
Rata arcului: 85 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 50-56 mm
Lungime: 165 mm
Rata arcului: 105 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 50-56 mm
Lungime: 165 mm
Rata arcului: 110 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 245 mm
Rata arcului: 90 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 245 mm
Rata arcului: 95 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 40 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 50 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 55 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 60 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 65 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 59 mm
Lungime: 195 mm
Rata arcului: 105 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 59 mm
Lungime: 195 mm
Rata arcului: 95 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 57-59 mm
Lungime: 185 mm
Rata arcului: 170 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 57-59 mm
Lungime: 185 mm
Rata arcului: 200 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 155 mm
Rata arcului: 120 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 61 mm
Lungime: 250 mm
Rata arcului: 45 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 57-59 mm
Lungime: 185 mm
Rata arcului: 185 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 155 mm
Rata arcului: 105 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 58-60 mm
Lungime: 210 mm
Rata arcului: 100 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 58-60 mm
Lungime: 210 mm
Rata arcului: 95 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 235 mm
Rata arcului: 48 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 235 mm
Rata arcului: 54 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 235 mm
Rata arcului: 57 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 235 mm
Rata arcului: 60 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 235 mm
Rata arcului: 63 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-60 mm
Lungime: 245 mm
Rata arcului: 100 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-60 mm
Lungime: 245 mm
Rata arcului: 105 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-60 mm
Lungime: 245 mm
Rata arcului: 110 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-60 mm
Lungime: 245 mm
Rata arcului: 90 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-60 mm
Lungime: 245 mm
Rata arcului: 95 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 46 mm
Lungime: 150 mm
Rata arcului: 110 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 46 mm
Lungime: 150 mm
Rata arcului: 150 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55-58 mm
Lungime: 195 mm
Rata arcului: 110 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 58-60 mm
Lungime: 210 mm
Rata arcului: 80 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 70 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 75 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 80 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 85 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 90 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 55 mm
Lungime: 255 mm
Rata arcului: 95 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-62 mm
Lungime: 245 mm
Rata arcului: 110 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 56-62 mm
Lungime: 245 mm
Rata arcului: 120 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 57 mm
Lungime: 215 mm
Rata arcului: 80 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 57 mm
Lungime: 215 mm
Rata arcului: 85 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 47 mm
Lungime: 190 mm
Rata arcului: 35 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 47 mm
Lungime: 190 mm
Rata arcului: 40 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 47 mm
Lungime: 190 mm
Rata arcului: 45 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 47 mm
Lungime: 190 mm
Rata arcului: 50 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Date tehnice:
Diametru interior: 47 mm
Lungime: 190 mm
Rata arcului: 55 N/mm²
Arcurile de amortizor spate K-Tech sunt fabricate din sârmă de crom-siliciu de cea mai înaltă calitate. Fiecare arc este înfășurat la rece, tratat termic, presetat și rectificat la lungime. Apoi, stratul de fosfat este aplicat pentru protecție împotriva coroziunii și apoi se pulverizează, înainte de a se atașa numărul de piesă. Toate arcurile sunt fabricate conform standardului DIN 2095, Clasa 1.
Caracteristici:
Înfășurat la rece
Tratat termic
Întărit
Tratat prin sablare cu bilă
Capete rectificate
Strat de fosfat și acoperire cu pulbere epoxidică
Numerotat
Culoare: conform imaginii
Conținut pachet:
1 bucată
Filter Products
Filtrați după vehicul
Sau caută:
Filtrează după preț
Categorii
- Accesorii (435)
- Consumabile (4650)
- Echipamente atelier (487)
- Electrice (708)
- Kituri de coborare - reducere înălţime (786)
- Kituri de reparație rulmenți roată (97)
- Limitare A2 motociclete (374)
- Motociclete Second-Hand (66)
- SALE (28)
- Sisteme de evacuare (1829)
- Sisteme de iluminare (1049)
- Suspensii (8028)
- Amortizoare (1146)
- Amortizoare Wilbers (4543)
- Amortizor spare (16)
- Amortizor spate (293)
- Furcă față (2002)
- Uleiuri pentru suspensii (15)
- Unelte pentru suspensii (14)
BRS Performance este direct importator de piese de calitate germană pentru motociclete, oferă consultanță specializată și o selecție de top de motociclete SH importate de la dealeri autorizați din Germania.
- 0743 135 854
- [email protected]
© BRS PERFORMANCE S.R.L.
BRS Performance este direct importator de piese de calitate germană pentru motociclete, oferă consultanță specializată și o selecție de top de motociclete SH importate de la dealeri autorizați din Germania.
suport clienți
Servicii BRS
CATEGORII